E8PC Drucksensoren minimieren

E8PC Drucksensor

Bitte mehr Infos zu E8PC Drucksensoren


Erkennen Anzeichen von Unregelmäßigkeiten im Kühlwasser und Hydrauliköl durch gleichzeitiges Messen von Druck und Temperatur

  • Erfassung von Druck und Temperatur zur Vermeidung von plötzlichen Produktionsstopps und Herstellungsfehlern
  • Auswahl an Ersatzadaptern für einen unkomplizierten Austausch Ihrer aktuellen Druck- und Durchflussmesser
  • Analoger Stromausgang und IO-Link-Datenübertragung ermöglichen Eigendiagnosen auf Defekte im Sensor selbst


Appearance Applicable fluid Rated pressure range Control output Communication method IO-Link baud rate Order code
Liquid and gas -0.1 to 1 MPa PNP IO-Link
COM2 (38.4 kbps) E8PC-010D-E
COM3 (230.4 kbps) E8PC-010T-E
NPN Analog E8PC-010-E
Liquid 0 to 10 MPa PNP IO-Link
COM2 (38.4 kbps) E8PC-100D-E
COM3 (230.4 kbps) E8PC-100T-E
NPN Analog E8PC-100-E
0 to 40 MPa PNP IO-Link
COM2 (38.4 kbps) E8PC-400D-E
COM3 (230.4 kbps) E8PC-400T-E
NPN Analog E8PC-400-E

Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file).


It must be selected from the adapters below.

Appearance Type Nominal diameter of thread Thread type Materials Order code
Nominal diameter A Nominal diameter B
R1/8 male 6 A 1/8" R (taper thread) SUS304 E8PC-YA-A18
R1/4 male 8 A 1/4" R (taper thread) SUS304 E8PC-YA-A14
R3/8 male 10 A 3/8" R (taper thread) SUS304 E8PC-YA-A38
G1/4 female 8 A 1/4" G (parallel thread) SUS304 E8PC-YA-B14N
NPT1/8 male 6 A 1/8" NPT (taper thread) SUS304 E8PC-YA-C18
NPT1/2 male 8 A 1/4" NPT (taper thread) SUS304 E8PC-YA-C14

Cables (Sensor I/O Connectors)

A Cable is not provided with the Sensor. It must be ordered separately.

Type Appearance Cable Order code
Socket on one cable end


2 m XS5F-D421-D80-F
5 m XS5F-D421-G80-F
L-shaped 2 m XS5F-D422-D80-F
5 m XS5F-D422-G80-F
Socket and plug on cable ends Straight/straight 2 m XS5W-D421-D81-F
5 m XS5W-D421-G81-F
L-shaped/l-shaped 2 m XS5W-D422-D81-F
5 m XS5W-D422-G81-F

Refer to Sensor I/O Connector/Sensor Controller on your OMRON website for details.

Throttle (for replacement)

If the excessive pulsation or surge voltage is expected, use a throttle. Install it inside the adapter and use.

Appearance Type Material Order code Installation method
For a male adapter SUS304 E8PC-YS
For a female adapter SUS304 E8PC-YS-N

O-ring (for replacement)

Appearance Type Order code
For E8PC-010 E8PC-YL-1
For E8PC-100/-400 E8PC-YL-2
Female for adapter G1/4 E8PC-YL-3



Model PNP(COM2) E8PC-010D-E E8PC-100D-E E8PC-400D-E
PNP(COM3) E8PC-010T-E E8PC-100T-E E8PC-400T-E
NPN E8PC-010-E E8PC-100-E E8PC-400-E
Rated pressure range –0.1 to 1 MPa 0 to 10 MPa 0 to 40 MPa
Display range –0.20 to 1.10 MPa –0.10 to 11.00 MPa –0.10 to 44.00 MPa
Withstand pressure 4 MPa 30 MPa 50 MPa
Burst pressure 8 MPa 60 MPa 80 MPa
Display resolution 0.001 MPa 0.01 MPa 0.01 MPa
Applicable fluid temperature –20 to +100°C (no icing or condensation)
Pressure response time Control output: Select 3 to 6000 ms Analog output: Set value + 2 ms (90% response)
Pressure monitoring precision ±1.0% of F.S. or less
Pressure repeatability ±0.3% of F.S. or less
Ambient temperature characteristics ±0.6% of F.S./10°C
Hysteresis Variable
Pressure type Gauge pressure
Temperature monitoring rated range –20 to 100°C
Temperature monitoring precision ±4°C
Temperature repeatability ±1°C
Control output
Standard mode Judge if the measured value is the threshold value or more (or less).
Window mode Judge if the measured value is within the upper and lower limits.
Compatible fluid Gas and fluid not corroding the material of the wetted part (such as water, glycol solution, and oil)
Display method Numerical value indication: 4-digit 7-segment white LED with inverting function
Status indicator: Normal operation (green), status indication (orange), and error (red) The content of status indication is selectable.
Output indicator: OUT1 operation (orange), OUT2 operation (orange)
Unit indication: E8PC-⬜⬜⬜⬜: MPa (white),
E8PC-⬜⬜⬜⬜-E: MPa (white), bar (white), psi (white), °C (white)
IO-Link indicator: Lighting when communications are in progress (green)
Delay setting 1 to 9999 ms
(Select a function from invalid, ON delay, OFF delay, and one-shot.)
Connection method M12, 4-pole connector type
Connecting diameter G3/4 male (Use the optional adapter to convert the diameter) Connection strength 20 N·m
Output ch1
Control output Pressure control output (N.O./N.C.)
E8PC-⬜⬜⬜D/T: PNP
E8PC-⬜⬜: NPN
30 VDC or less, Class 2, max. 100 mA, residual voltage 1 V or less
Output ch2
Control output Pressure control output (N.O./N.C.) / temperature control output (N.O./N.C.)
E8PC-⬜⬜⬜D/T: PNP
E8PC-⬜⬜: NPN
30 VDC or less, Class 2, 100 mA max., residual voltage 1 V or less
Analog current output Pressure analog output / Temperature analog output
Current output 4 to 20 mA (maximum load resistance 350Ω or less)
(Display value ± 2% of F.S.)
External input One-point teaching, zero point adjustment input (selectable, initial status: invalid)
short-circuit current 1.5 mA or less, input time 20 ms or more
IO-Link IO-Link specification Ver 1.1
Baud rate E8PC-⬜⬜⬜D: COM2 (38.4kbps)
E8PC-⬜⬜⬜T: COM3 (230.4Kbps)
Data length PD Size: 6 byte
OD Size: 1 byte (M-sequence type: TYPE_2_V)
Minimum cycle time E8PC-⬜⬜⬜D (COM2): 3.2 ms
E8PC-⬜⬜⬜T (COM3): 2.0 ms
Power supply Power supply voltage 10 to 30 VDC (including 10% ripple (p-p)), Class 2
Power consumption 1,200 mW or less
(When power supply voltage is 30 V, current consumption must be 40 mA or less.
When power supply voltage is 10 V, current consumption must be 120 mA or less.)
Protection circuit Power supply reverse connection protection, output short-circuit protection, and output reverse connection protection
Ambient temperature range –20 to 80°C in operation and storage, respectively (no condensation)
Ambient humidity range –35 to 85%RH in operation and storage, respectively (no condensation)
Vibration resistance
1000 VAC, 50/60 Hz, 1 min. between current-carrying parts and case
Shock resistance
10 to 2000 Hz, double amplitude 1.5 mm, 2 hours in X/Y/Z direction each
Impact (endurance) 500 m/s2, three times in X/Y/Z direction each
Protective structure IP67
Pollution degree 3
Altitude 2,000 m or less
Installation place Indoor
Material Wetted part Pressure port: SUS304L, diaphragm pressure port: Al2O3(alumina), O-ring: FKM
Other than wetted part Head: PPSU, display unit: PES, button: PBT, chassis: SUS304L
Weight Approx.190 g
  • Throttle (Model E8PC-YS and E8PC-YS-N), one each
  • O-ring × 1 (Model E8PC-010: Model E8PC-YL-1, Model E8PC-100/400: Model E8PC-YL-2)
  • Ferrite core × 1 (TDK's Model ZCAT1730-0730A)
  • User's manual (Japanese, English, and Chinese), one each
  • Compliance sheet
  • Index list



IoT Pressure Sensor E8PC-⬜⬜⬜-E


E8PC-YA-A⬜⬜, E8PC-YA-C⬜⬜

Model E8PC-YA-A18 E8PC-YA-A14 E8PC-YA-A38 E8PC-YA-C18 E8PC-YA-C14
Thread G3/4×R1/8 G3/4×R1/4 G3/4×R3/8 G3/4×NPT1/8 G3/4×NPT1/4
A 43.3 47.1 47.6 43.3 47.1
B 21.1
C 13
D 9.2 13 13.5 9.2 13
E 34
F 3.7 4.8 5 3.7 4.8
G 17 17 19 17 17









Copyright 2020 Buxbaum Automation GmbH